經銷品牌
你的位置：首頁 » 產品中心 » Former(二手)儀器 » 網絡分析儀 » E5061B-3L5 LF-RF Network Analyzer---聯系電話18912657535
儀器名稱: E5061B-3L5 LF-RF Network Analyzer---聯系電話18912657535 儀器型號: E5061B-3L5 儀器品牌: Agilent 儀器指標: 5 Hz to 3 GHz
S-parameter test port
- 5 Hz to 3 GHz
Gain-phase test port
- 5 Hz to 30 MHz
- 1 MΩ inputs and 50 Ω inputs
- Accurate milliohm and high-attenuation measurements
Comprehensive LF-to-RF network analysis
The E5061B-3L5 LF-RF NA option offers versatile network analysis in the broad frequency range from 5 Hz to 3 GHz. Comprehensive LF network measurement capabilities including built-in 1 MΩ inputs have been seamlessly integrated with the high-performance RF network analyzer. The E5061B-3L5 is the right solution for component and circuit evaluations in the R&D environment.
E5061B-3L5 LF-RF network analyzer option + 005 Impedance analysis option - NA plus ZA in one box
The E5061B-005 provides the impedance analysis (ZA) firmware for the E5061B-3L5 LF-RF network analyzer. This option enables the analyzer to measure impedance parameters of electronic components such as capacitors, inductors, and resonators. The combination of NA and ZA capabilities further enhances the analyzer’s versatility as a general R&D tool. Basic ZA functionalities including fixture compensation and equivalent circuit analysis are supported by the firmware. The DC biased impedance measurement is possible with the built-in DC bias source provided by the E5061B-3L5.
NOTE:
The E5061B does not support the control function for the discontinued 87075C/87050E multiport test set via parallel port.
E5061B-3L5
LF-RF network analyzer with DC bias source, 5 Hz to 3 GHz
E5061B-005
Impedance analysis for LF-RF network analyzer
E5061B-010
Time domain/fault location analysis
E5061B-020 Standard hard disk drive
E5061B-115
Transmission/Reflection test set, 100 kHz to 1.5 GHz, 50 ohm system impedance
E5061B-117
Transmission/Reflection test set, 100 kHz to 1.5 GHz, 75 ohm system impedance
E5061B-135
Transmission/Reflection test set, 100 kHz to 3 GHz, 50 ohm system impedance
E5061B-137
Transmission/Reflection test set, 100 kHz to 3 GHz, 75 ohm system impedance
E5061B-1A7 Calibration + Uncertainties + Guardbanding
E5061B-1CM Rack mount kit
E5061B-1CN Front handle kit
E5061B-1CP Rack mount and front handle kit
E5061B-1E5 High stability timebase
E5061B-215
S-parameter test set, 100 kHz to 1.5 GHz, 50 ohm system impedance
E5061B-217
S-parameter test set, 100 kHz to 1.5 GHz, 75 ohm system impedance
E5061B-235
S-parameter test set, 100 kHz to 3 GHz, 50 ohm system impedance
E5061B-237
S-parameter test set, 100 kHz to 3 GHz, 75 ohm system impedance